 Quadrus®
Verifier
DoD-Ready Verifier for the Factory Floor
Quadrus® Verifier is an ISO/IEC
15415 and AS9132A-compliant Data Matrix verifier for use in
production environments. It is an ISO/IEC 15426-2 certified
Data Matrix verifier, ensuring that your marks will be
verified accurately every time.
Unlike most
verifiers that are mounted on scientific stands designed for
the lab, the Quadrus Verifier is a fully-contained, compact
device that is easy to integrate into a plant-floor setting. Quadrus Verifier’s fully enclosed
illumination chamber provides the controlled lighting
environment necessary for accurate, repeatable verification.
No on-site calibration of optics or lighting is needed to
verify marks with Quadrus
Verifier. Simply present the part to Quadrus Verifier,
trigger, and receive the symbol verification report.
Send
a sample of your label to our Corporate Office and
Microscan will verify the label and email you a
report.
ISO/IEC 15426-2 Certified
Quadrus Verifier is ISO/IEC 15426-2 certified. It is
precisely engineered to meet rigorous verification
standards, ensuring accurate and consistent verification.
What is ISO/IEC 15426-2 and why is it important?
ISO/IEC 15426-2 is a Verifier conformance standard that’s
referenced in the Introduction of the ISO/IEC 15415
specification; paragraph seven. Using a Data Matrix Verifier
that conforms to this standard is important because it
ensures consistency amongst Verifiers used at two or more
different times or locations The Quadrus Verifier is the
only Data Matrix Verifier available that meets this strict
conformance guideline.
ISO/IEC 15415 Compliant
Quadrus Verifier provides verification of 2Dsymbols for all parameters:
 Symbol
contrast |
Print
growth (not graded) |
|
Fixed
pattern damage |
Reference
decode |
|
Modulation |
Axial
non-uniformity algorithms |
|
Unused
error correction |
Grid
non-uniformity |
AS9132A
Verifies directly-marked Data Matrix symbols in accordance
with the parameters called out in the AS9132A standard:
|
Quiet
zone |
Dot
center offset |
|
Dot
ovality |
Angle
of distortion |
|
Cell
fill |
Symbol
type |
|
Contrast |
|
AIM-DHM
Cell Contrast
Fixed Pattern
Grid Non-conformity
Cell Modulation
Unused ECC
Minimum Reflectance
MIL-STD-130M
Requires verification of Data Matrix symbols to both ISO/IEC
15415 and AS9132A standards as required by the MIL-STD-130M
specification.
Plant-Floor Ready
Quadrus Verifier is the first 2D verifier designed
specifically for use in a production plant environment. Its
compact, lightweight design makes the Quadrus Verifier easy
to integrate into production processes. A self-contained,
factory-calibrated
system with flexible mounting allows the Quadrus Verifier to
be adapted to any application quickly and easily.
Factory Calibrated System
Quadrus Verifier provides the user with a ready-to-use, ISO/IEC
15426-2 compliant, calibrated system. Simply center a symbol
in the field of view and trigger a read cycle, and Quadrus
Verifier will output the results. The user is not required
to focus the optics or set the light angles. Fixed optics
and pre-set illumination angles make Quadrus Verifier
consistent, reliable, and accurate.
Illumination Chamber
The chamber is specifically engineered to produce the
illumination angles required by the ISO/IEC 15415 standard.
Symbologies:
Quadrus Verifier is specifically engineered to verify 2D
Data Matrix codes.
|
Let Microscan Grade Your Data Matrix Label |
With the introduction of the Quadrus
Verifier, Microscan is offering a
complimentary Symbol Verification
Report.
Send
a sample of your label to our Corporate
Office and Microscan will verify the
label and email you a report. |
 |
|
|
